DuraPower Pipe and Hose Repair Kit DPT4180
Lot of (4) DuraPower Pipe and Hose Repair Kit DPT4180
|Description:||Pipe & Hose Repair Kit – Air Actuated Fiberglass Tape|
|Size:||4″ x 180″|
|Contents:||One roll of special resin-impregnated fiberglass.
Tape sealed in a foil pouch & one pair of protective gloves.
NSF – Certified safe to use on drinking water systems. NSF/ANSU Standard 61. Certificate #1G100-01
- Easy to Use
- Works Fast
- Sets Like Steel
- Seals Under Water
- PVC Pipe
Instructions: Remove all pressure from the hose or pipe. Thoroughly clean and sand area to be repaired, roughening the area around the break.Using the supplied gloves, remove the fiberglass tape from the foil pouch, immerse in water for 20 to 30 seconds. Remove tape from water. Wrap the tape tightly over the break extending the tape at least 2″ on either side. Keeping the tape and gloves wet, apply seven or eight layers. To increase strength and bonding, continue to tighten and squeeze the tape in the direction of the wrap. Continue every two minutes for about 15 minutes or until the tape is very tacky. A second application may be applied before repair cures. Excess resin may be removed with alcohol or acetone before repair cures. The repair will completely cure in 30 to 40 minutes. Cured repair may be sanded and painted. Applied correctly, the repair will withstand 150 PSI and 600°F.
Caution: Use enclosed protected gloves. Avoid contact with eyes, skin or clothing. May cause skin irritation. Avoid prolonged or repeated breathing of vapor. Use with adequate ventilation. In case of contact with eyes, flush immediately with water for 15 minutes and seek medical attention. Caution: Vapors harmful. Skin and eye irritant. Keep out of reach of children.